INNOVATION AND TECHNOLOGY

New compacting press concept for even better performance.
Electrical driven CNC controlled multilevel press with three upper and lower levels

The constant high quality of our products is of primary importance. We only use raw materials supplied with quality certificates according to well defined ISO standards. We have a fully equipped laboratory to make all tests during the various stages of production. 25 years of experience allow us to produce a wide range of Tungsten Carbide ensuring metallurgical characteristics always reliable.

NEW!

10CNC AXIS Side compaction or pressing of cross holes
NEW!!! SIDE COMPACTION AND CROSS HOLES OPEN UP NEW PM PART DESIGNS

Advanced pressing options offered by our new electrical press, which now include side compaction or the pressing of cross holes.
Powder compacting press with electrical only drives, which combine the rigidity and productivity of mechanical press with a very high precision.
We produce with servo-motorised CNC powder press with closed-loop control systems that is the state-of-the-art in powder compaction technology. This sophisticated press can, for example, provide a maximum in full version of eighteen closed-loop controller systems for powder compaction. These can be six top and six bottom levels each, plus the top punch, the die and the core rod. In addition, the filler movement is closed-loop controller for optimised powder filling.
Each drive motor is equiped with its own measuring system; the closed-loop control is carried out individually and directly on the active axis. This is said to eliminate any inaccuracies resulting from indirect measuring.
The positioning and repeating accuracy of the press axes is said to be +-0,001mm and, therefore, easily meets today’s requirements for the tolerances of PM compacts.

CHEMICAL COMPOSITION AND POWDER CHARACTERISTICS

GRADES N/mm² N/mm²
  Co Tic TaC WC Grain size Density Hv30 HRA Trans. rup.   Co Tic TaC WC Grain size Density Hv30 HRA Trans. rup.
K01 3,0     97,0 sub-micron 15,25 2025 94,1 2100 G1 6,5 93,5 medium-fine 14,80 1630 92,2 2500
K05 4,0 96,0 sub-micron 15,18 1820 93,1 2200 G2 12,0 88,0 medium

14,30

1240 88,8 3000
K10 6,50 93,5 fine 14,75 1750 92,8 2300 G3 15,0 85,0 coarse 14,00 1100 87,4 3100
K20 7,0 93,0 fine 14,50 1665 92,3 2500 G4 20,0 80,0 coarse 13,50 1040 86,6 3200
K22 10,0 0,5 89,5 fine 14,30 1600 92,0 3600 G5 25,0 75,0 coarse 13,15 810 83,2 3200
K22-S 10,0 0,5 89,5 sub-micron 14,20 1630 92,2 4100 G6 28,0 72,0 coarse 12,90 750 82,5 3200
K30 8,5 91,5 medium-fine 14,40 1435 90,7 2600 M2 9,0 91,0 coarse 14,60 1215 88,4 2700
K40 12,0 88,0 fine 14,10 1345 89,9 2800 P10 9,8 19,0 19,5 51,7 medium-fine 10,20 1530 91,6 1460
K40-S 12,0 88,0 sub-micron 14,05 1600 92,0 4400 P25 9,0 7,5 5,0 78,5 medium-fine 12,55 1450 90,9 1800
K45 15,0 85,0 medium 14,00 1190 88,3 3100 P35 11,4 6,4 8,0 74,2 medium 12,50 1400 90,4 2000
K50 15,0 85,0 fine 14,00 1300 89,5 3000 P6 11,0 4,0 8,0 77,0 medium-fine 13,10 1380 90,0 2080
K60 20,0 80,0 fine 13,50 1160 88,0 3200 Other special grades ready to press are available on request